Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Additional hardware included with most idler pulleys to make installation easier.

• Original Equipment (OE) Exact - Looks and fits just like the OE
• Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements
• Steel or thermoplastic construction provides high durability for extended life
• Industry's best light-duty coverage and consistently first to market for late model application coverage
• Vibration damping system extends life of tensioner and other accessory components
• Reliable operation under severe conditions

Gates - Driven By Possibility

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Additional hardware included with most idler pulleys to make installation easier.

• Original Equipment (OE) Exact - Looks and fits just like the OE
• Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements
• Steel or thermoplastic construction provides high durability for extended life
• Industry's best light-duty coverage and consistently first to market for late model application coverage
• Vibration damping system extends life of tensioner and other accessory components
• Reliable operation under severe conditions

Gates - Driven By Possibility

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Additional hardware included with most idler pulleys to make installation easier.

• Original Equipment (OE) Exact - Looks and fits just like the OE
• Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements
• Steel or thermoplastic construction provides high durability for extended life
• Industry's best light-duty coverage and consistently first to market for late model application coverage
• Vibration damping system extends life of tensioner and other accessory components
• Reliable operation under severe conditions

Gates - Driven By Possibility

Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.

Gates ensures that every tensioner they manufacture is built to rigid tolerances and specifications that guarantee OE fit, form and function.

• Full line coverage for Import, Domestic and Heavy-Duty applications.
• Looks, fits and functions just like the OE.
• Manufactured using same technology as Original Equipment Manufacturer (OEM) part assures factory match.
• Patented vibration damping system improves tensioners, belts and accessory life.
• Torsional round spring design provides consistent tension and does not allow contamination.
• Comprehensive line includes parts to fit cars, vans, SUVs and light/heavy-duty trucks.

Gates - Driven By Possibility

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

• Recommend for upper, lower, by-pass, heater and other coolant hose applications.
• Heat and ozone resistant cover.
• Engineered to resist electrochemical degradation - the leading cause of hose failure.
• Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
• Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

• Recommend for upper, lower, by-pass, heater and other coolant hose applications.
• Heat and ozone resistant cover.
• Engineered to resist electrochemical degradation - the leading cause of hose failure.
• Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
• Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

• Recommend for upper, lower, by-pass, heater and other coolant hose applications.
• Heat and ozone resistant cover.
• Engineered to resist electrochemical degradation - the leading cause of hose failure.
• Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
• Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

Why take a chance? With Gates TCKs, you can avoid warranties and comebacks by replacing all critical system components at the same time.

• Popular kits for virtually every timing belt-driven Import and Domestic application
• Most kits include Original Equipment (OE) Tensioners and Idlers.
• Total solution for any application - includes Belts, idlers, tensioners and supporting hardware with detailed installation instructions.
• Great convenience. Ease of part sourcing. Reduced customer combacks.

Look for the Genuine OE Component sticker on the box guaranteeing the tensioners and idlers included in the kit are what originally came on the vehicle.

Gates Driven By Possibility

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

• Belt of choice by fleets, including 3/4 and 1 ton pickups
• Lowest cost per mile
• Consistently outperforms all competitors
• Outstanding crack resistance at extreme temperatures
• Problem solver
• Designed for the toughest applications

Gates - Driven By Possibility

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

• Recommend for upper, lower, by-pass, heater and other coolant hose applications.
• Heat and ozone resistant cover.
• Engineered to resist electrochemical degradation - the leading cause of hose failure.
• Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
• Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

• Belt of choice by fleets, including 3/4 and 1 ton pickups
• Lowest cost per mile
• Consistently outperforms all competitors
• Outstanding crack resistance at extreme temperatures
• Problem solver
• Designed for the toughest applications

Gates - Driven By Possibility

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

• Belt of choice by fleets, including 3/4 and 1 ton pickups
• Lowest cost per mile
• Consistently outperforms all competitors
• Outstanding crack resistance at extreme temperatures
• Problem solver
• Designed for the toughest applications

Gates - Driven By Possibility